How do you adjust Draw Weight of a Bow?

Question

I need to know how to adjust Draw Weight

Answer 1

You adjust the draw weight by turning the 2 allen screws at the base of each limb(where the limb meets the riser).The screws must be adjusted exactly the same.To start turn the screws all the way in(clockwise) and then begin turning them out making sure to count the number of turns to be sure that they are set in unison.Turn the screws half a turn at a time until you get the proper draw weight.Be careful not to turn the screws out to far or the bow will explode in your face,I suggest you take the bow to an archery shop to have it properly set and tuned.

Answer 2

I am not a bow hunter but my cousin is starting to shoot one, I believe that the draw weight is adjusted with the allen head screw that holds the limbs in place but if you cannot figure it out read the instruction that came with the bow, or take it to a bow shop and they will help you to adjust it, in my opinion you should start out with the lighter draw weight and as your shooting improves move up in 5 lbs increments, my friend Rich who has been shooting one for over twenty years can put four arrows in a 3 inch circle at 25 yards(70 lbs bow), but he has practiced far more then my cousin, besides in bow hunting you will only get one shot

Answer 3

On a compound bow, the screws that hold the limbs on also adjust the tension. Care must be taken to adjust them evenly and to be sure they are at the same point before adjusting.

Answer 4

That depends on the bow. Some can be adjusted and others cannot. If you don't have a manual for your bow and cannot get one, just take it to an archery shop and have them show you how to adjust it.

Answer 5

Just like everyone else said,you turn the screws on the limbs.Normally when you do this,there's a method.Like on a bow of mine,one turn equals three pounds.I'd consult an owner's manual,or take it to a pro shop.

Answer 6

By turning the bolt, normally a allen wrench bolt, on the front of your bow, where the limbs attach to the riser. Turn them in make your bow stronger, out of course wee-kens it. make sure the limbs are even.