alright. i have a sony cdx-s1000 , i found the instruction booklet for it online, but i cannot find anything about the preouts for it in the booklet. The subwoofers comming offf of the pre amp outs are powered by a kenwood amp. everything is set fine, but no sound is comming out the subs. Is there some way to turn on the preouts on this or do they always have a fed comming off of them? if there is always a signal coming out and no way to turn it on, then i think it could be the amp. i checked everything with a volt meter. would a bad amp not have any sound at all coming out of it? how would i personaly repair this amp if it is broken? Thank you for helping.
2006-12-07 09:02:19 · 2 answers · asked by mattolomeu 1 in Cars & Transportation ➔ Car Audio
I said i checked EVERYTHING with a volt meter including the remote turn on
2006-12-07 09:06:20 · update #1
You can test the amp with an MP3 player (or portable CD player) using the headphones jack and a 1/8" to RCA cable. Just be sure the volume is turned down on your "source" and gradually turn it up (not passed half way).
By process of elimination, you will find the problem.
2006-12-07 09:07:15 · answer #1 · answered by Anonymous · 1⤊ 1⤋
Make sure the remote wire is hooked up to the amp. \
Geez, sorry, its just that ive had plenty of people tell me its hooked up right, then when i lookat it , the remote wire isnt connected to anything.
Is your gain turned up at all?
2006-12-07 09:04:40 · answer #2 · answered by vanman8u 5 · 0⤊ 1⤋