2006-12-07 00:38:43 · 6 answers · asked by bridgett s 2 in Cars & Transportation ➔ Car Audio
you gotta trust me here ok! look closely...very closely...there should be a very small hole near the button or in the general area of where you put the cd in. this is there for this very example...get a paper clip and poke it into the hole(i know i didnt want to this either!) it mite take a little bit of movement but eventually u will hit the right spot and it will pop out! go for it!
2006-12-07 04:52:18 · answer #1 · answered by therammid 1 · 0⤊ 0⤋
Few car players will have the little manual eject hole. But if you have one, by all means try it. You can also try momentarily pulling the radio memory fuse, some players will eject when power is first applied to them. But chances are 99% that you will have to take the radio out of the car and take it apart enough to remove the disc yourself. I was an electronics tech for a few years and had to do that all the time.
Once you get the disc out, throw the radio in the trash and buy a new one. If it did it once, it will do it again.
2006-12-07 09:36:35 · answer #2 · answered by fearlessmonkeyman 1 · 0⤊ 0⤋
Try using a smooth ruler and slide it in over the CD and hit edject. It should pop right out.
2006-12-07 00:47:45 · answer #3 · answered by c0mplicated_s0ul 5 · 0⤊ 0⤋
go to stereo shop. i tried on mine and destroyed it.. the player not the CD!
2006-12-07 00:46:07 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Use a blow torch to melt the C D
2006-12-07 00:41:24 · answer #5 · answered by Golly Geewiz 4 · 0⤊ 0⤋
tear it apart or push aonoth half way in then it could help idk
2006-12-07 10:45:37 · answer #6 · answered by dodgeum43 3 · 0⤊ 0⤋