I already upgraded the firmware and it still goes back into the menu. is it because i tried using an antenna to get tv? because i cut off my cable tv a while ago and tried to get OTA tv.. i bought an HDTV antenna.. and then the problems began after that. i unplugged the antenna cables but still the tv still goes into the menu and goes into a frenzy
2006-12-05 15:12:15 · 3 answers · asked by kc 2 in Consumer Electronics ➔ TVs
It sounds like you might have a problem with the TV Try unplugging unit for a couple hours and then plug back in. If still doing it you prob need a service call. the newer tvs and stereos are basically computers and when the memory gets scrambled usually the only way to straighten it out is to reset it ( like a cold boot) if this doesn't work(likely won't) get a service person ( note unit must unplugged long enough to drain capacitors)
2006-12-05 15:27:24 · answer #1 · answered by CJ 3 · 0⤊ 0⤋
Exorcism.
2006-12-05 23:15:49 · answer #2 · answered by barrabas 3 · 1⤊ 0⤋
Something wrong with the micon IC or maybe the EEPROM IC.
2006-12-06 07:22:04 · answer #3 · answered by Anonymous · 0⤊ 0⤋