my mustang is making a noise real loud when i put the clutch in to shift the gears help?

Answer 1

it sounds like you have lost the throw-out bearing on the clutch fork. you need to go to a good shop and have it fixed.

Answer 2

This appears like a bad cv joint, reckoning on make and kind axel shafts are fantastically useful at a areas domicile! The cv shaft is fairly like the driveline in a rear wheelcontinual motor vehicle/truck on a front wheelcontinual the shaft run from the transmission to bot front wheels. you would be able to or won't have the skill to tell witch shaft is undesirable yet once you turn your wheels to the left or superb and seem at the back of the wheel if the rubber boot is torn or you spot alot of grease it particularly is a fantastically stable indication the the joint has failed or will fail. stable success!

Answer 3

well if this is just happening now u should first let the motor cool down and wait while the car is on for at least 4 minutes. I'm not sure if this is the best advice. You should also go to a Mustang place and if ur in California, go to a Mustang place in Van Nuys.

Answer 4

consider the throw out bearing, bad clutch and plate.
look see if the shift linkage may have shifted, and it is not dis engageing all of the way

Answer 5

Throw out bearing,pilot bearing

Answer 6

you re throw out bearing is gone. this ones gonna cost ya you're gonna have to have a new clutch and throwout bearing hope you have a handy bf the garage is gonna get you for about 2500 bucks

Answer 7

Throw out bearing.

Answer 8

my personal opinion you jest letting out the clutch too early before you shift.i recomed you get that checked by a qualified person or you just need more experience;)

Answer 9

Linkage.

Answer 10

take it in! My camaro is doing perfect!