Hi, I wan to submit a project in college and I am working on Dark-Light Activated Relay. I am a beginner. I have found circuit for Dark-Light Activated Relay on www.uoguelph.ca in that circuit diagram a battery of 6 v used. But in circuit at top shown that where to connect battery positive terminal but where to connet battery negative cicuit is not mentioned. Is battery negative in connected to ground terminal shown in figure ? Please help me.
To View Circuit Diagram of Dark-Light Activated Click on following link-
http://www.uoguelph.ca/~antoon/circ/actrelay.htm
And tell me is that circuit diagram is correct if yes where do I connect negative terminal of battery ?
2006-12-05 02:16:08 · 6 answers · asked by Electrosam 3 in Science & Mathematics ➔ Engineering
Yes. connect negative terminal of battery to ground.
2006-12-05 02:19:24 · answer #1 · answered by davidosterberg1 6 · 0⤊ 0⤋
In electronic circuits it is implied that the negative terminal of the battery is connected to the ground.
Wish you good luck for you rproject
2006-12-05 11:20:41 · answer #2 · answered by Ramanadhan C 2 · 0⤊ 0⤋
Yes sure you can connect negative to ground but remember Electronics ground should be seperate and not mixed with the other circuit if any.Try to use body as ground.
Good luck
2006-12-06 04:54:15 · answer #3 · answered by Pito 1 · 0⤊ 0⤋
I had look at the diagram. Its correct. Connect battery negative terminal at earthing point. It will work.
Best luck.
2006-12-07 01:43:36 · answer #4 · answered by Chosen One 1 · 0⤊ 0⤋
You connect the positive side of the battery to where it shows "+6v" and the negative side to the "ground" symbol, a series of four decreasing length lines at the bottom where Q1 and R3 are connected.
Good luck! Hope this helps!
2006-12-05 10:21:32 · answer #5 · answered by cfpops 5 · 0⤊ 0⤋
yes connect it to ground
2006-12-08 07:40:51 · answer #6 · answered by nambu_fact 2 · 0⤊ 0⤋