2006-12-04 22:31:44 · 6 answers · asked by s_brekke 2 in Consumer Electronics ➔ Cameras
You should be able to use all of your SLR lens on your DSLR.
2006-12-05 02:25:03 · answer #1 · answered by redbull_photo 4 · 0⤊ 0⤋
The lens mount is the same but there's a tiny chance that you'll experience compatibility issues with the AF and/ or metering. With old third party lenses, it pays to check for yourself in a camera shop.
The 28-200mm range isn't quite suitable as an all-in-one lens, however. All Nikon bodies have a 1.5 focal length multiplier, which effectively turns your lens into a 42-450mm zoom.
An 18-200mm zoom would be more appropriate for digital bodies. (Nikon makes a great one for around $750.) Or for around $280, you could get a Sigma 18-125mm zoom - effectively 27-188mm.
2006-12-04 23:31:17 · answer #2 · answered by OMG, I ♥ PONIES!!1 7 · 0⤊ 0⤋
Yes, you should be able to use your lens for both SLR and DSLR. The only changes are in the electronics and shifting the camera from a film base to a digital format. The lens mountings should stay the same, they do for Canon which I use.. I hope this helps, Good Luck.....
2006-12-04 22:47:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If the Tamron replaced into made after 2008, that is going to have a motor, yet examine previously you purchase. Sigma lenses with a motor are marked, 'HSM,' 'OS,' is Sigma's equivalent of Nikon's VR.
2016-11-30 04:05:40 · answer #4 · answered by ? 4 · 0⤊ 0⤋
YES...check out their website http://www.tamron.com/lenses/prod/28300_di.asp .
it mounts on to following cameras - Canon AF, Minolta AF-D, Nikon AF-D, Pentax AF.
2006-12-05 08:36:01 · answer #5 · answered by QA Guy 3 · 0⤊ 0⤋
yes it will work fine. just remeber that Nikon DSLR's have a 1.5 FOV crop factor due to smaller sensero vs film. for your effective focal lenghth vs your film camera you'll be shooting a 42-450mm.
2006-12-04 22:50:03 · answer #6 · answered by clavestone 4 · 0⤊ 0⤋