I'm having a problem with my HDTV. I've got an ATI Radion 9800 Pro. I connected it to my HDTV, connected the Audio, and then turned them on. I set the TV to the proper resolution, 768X1360, and now it flickers on and off. It's rather annoying, the Audio cuts out when the TV cuts out as well. Any one know how to fix this?
2006-12-03 16:31:50 · 2 answers · asked by Joshua R 1 in Consumer Electronics ➔ TVs
you have a problem with the Card,need to be change
go to http://experts.about.com/q/video-card-problem
2006-12-03 16:48:07 · answer #1 · answered by ranjithathatha 2 · 0⤊ 0⤋
768x1360? there is no such resolution. Well the problem is that you set the resolution too high for your tv. Check your manual for the correct solution. There should be a section in the manual that will tell you the correct resolution, Horizontal Freq and Vertical Freq. Next turn on your pc and set the video card to this setting. Start with the lowest setting like 640x480 with a freq of 60 hz to see if you can get a picture. Next increase the resolution to 800x600 (60hz) and more if your tv can support it. Setting the wrong resolution can permanently damage your tv which you may already done it.
2006-12-04 01:49:46 · answer #2 · answered by Ted B 6 · 0⤊ 0⤋