tightening fan belt on 96 toy. previa van how?
2006-12-02 15:37:48 · 3 answers · asked by felz68 1 in Cars & Transportation ➔ Car Makes ➔ Toyota
Its probably a serpentine belt, try the alternator, that's most likely what is used to tension the system. Unless, the power steering belt is the one squeeking, then it probably has an idler pully (loosen the nut in the middle, then turn the long bolt on the top of the system untill the belt is tight, then tighten the pully bolt)
2006-12-02 15:46:47 · answer #1 · answered by Steve-o 3 · 0⤊ 0⤋
I think it should have a tension er on it which is spring loaded if it is a serpentine belt. On some cars you can pull back the tension er the wrong way so make sure you are turning it the right way. Good luck!
2006-12-02 15:45:44 · answer #2 · answered by Mike B 2 · 0⤊ 0⤋
there could be a sticky label on the fewer than neath part of the hood that shows the routing of the belts Toyota replaced into sturdy approximately putting those on there,,if not i don't recognize of any sturdy web pages a sturdy theory may be to purchase a sturdy restore handbook in this motor vehicle,,that is going to help you plenty interior the destiny noticeably in case you prefer to do your own upkeep,,sturdy good fortune,i'm hoping this help,s.
2016-12-18 06:35:40 · answer #3 · answered by ? 4 · 0⤊ 0⤋