2006-12-01 09:08:04 · 8 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
use an even bigger one
2006-12-01 09:15:37 · answer #1 · answered by crunchymonkey 6 · 0⤊ 0⤋
Is it broke in two or edges worn down? I have rebuilt with 7018 rods but prob not the best. Most anvils are wrought iron not cast. If its a small anvil prob be cheaper to replace.
2006-12-01 10:53:04 · answer #2 · answered by CJ 3 · 0⤊ 0⤋
Is it broke in 2 or edges worn down? I definitely have rebuilt with 7018 rods although prob now no longer the friendly. maximum anvils are wrought iron no longer sturdy. If its a small anvil prob be extra value-effectual to alter.
2016-12-29 18:49:10 · answer #3 · answered by ? 3 · 0⤊ 0⤋
How do you break an anvil in the first place?
2006-12-01 09:20:54 · answer #4 · answered by mainwoolly 6 · 0⤊ 0⤋
Repairing an anvil?
What century are we living in?
Go see ye local blacksmith shoppe.
2006-12-01 09:16:25 · answer #5 · answered by Ross L 2 · 0⤊ 0⤋
is it broken or just worn? if it's worn -try and find some (depending on how worn , if it's very worn and needs multiple passes you'll need to put a pad layer down )then a high impact hard faceing rod .don't forget to pre heat.
if it's broken (won't ask how) big weld preps, pre heat , low hydrogen rods. probably wouldn't be a bad idea to peen it after as well .
have fun
2006-12-02 23:42:36 · answer #6 · answered by crackedanvil 1 · 0⤊ 0⤋
Preheat and weld it with a nickel rod.
2006-12-01 09:18:30 · answer #7 · answered by Dawg 4 · 0⤊ 0⤋
Better question - How you manage to break a half ton lump of iron?
2006-12-01 09:21:32 · answer #8 · answered by Steve K 4 · 0⤊ 1⤋