English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have a 1987 Rockwood (Driftwood) the running lights,tail lights and brake lights quit working yesterday. The turn signals and headlights work. I checked the fuses and they're o.k. any suggestions?

2006-12-01 06:38:35 · 4 answers · asked by peedeepotter 1 in Cars & Transportation Maintenance & Repairs

4 answers

Wiring on motorhomes is a genuine nightmare, even if you have the factory diagram(s).
The MOST PROBABLE cause is going to be a bad ground wire. The reason the turn signals still work is that they are gaining ground source by following the filaments from the other lights. The others cannot use the turn signal circuit because the switch interrupts the circuit.
Easy to test -- either use a jumper wire to ground one of the lamp assemblies and see if it will illuminate.
If you have a test light, turn the lights on, and use the test light to complete the ground circuit at one of the lights. If it comes on, there is no ground. If this is the case, you are going to have to locate the MASTER ground for the body skin.

Good Luck and Merry Christmas

2006-12-01 06:50:15 · answer #1 · answered by Ironhand 6 · 0 0

You probably have a dirty connector or bad ground. Try to follow the wiring harness from the back to the front and fix anything you find.

2006-12-01 06:46:42 · answer #2 · answered by Lab 7 · 0 0

replace the bulb. They use a similar bulb yet distinct filaments interior that similar bulb. so a techniques because the radio is going its both a foul floor or ability provide going into the decrease back of the radio. Or the radio is wiped out and purely needs to get replaced.

2016-11-30 00:39:55 · answer #3 · answered by Anonymous · 0 0

check the wiring in the back :(

2006-12-01 06:49:42 · answer #4 · answered by Anonymous · 0 0

fedest.com, questions and answers