English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I've inherited an old PC (1998 vintage) with 64MB RAM, I want to increase this RAM. Opening up the box I can see three slots for DIMMS/SIMMS. Only one of the slots is occupied (by a SIMM), it says on the SIMM:

Infinean HYS64V8300GU-8-B
8Mx64 SDRAM
PC100-222-620
B2 80303

64 Mb, Sync, 100Mhz, CL2

Which of these numbers are important to know for buying extra memory? I've seen reference to PC100 and 133 memory in shops.

2006-12-01 04:24:24 · 8 answers · asked by pantocool 1 in Computers & Internet Hardware Desktops

8 answers

It's definitely PC100 memory so stick with that. While the motherboard might accept a single stick of 128mb, you can't be sure, so just use the same size (64mb) which was already installed. Obviously a machine of this vintage will be running Win98 (or Linux), so 128mb or 192mb of memory is fine.

XP requires a minimum of 256mb to run decently, so forget about running it on this old hardware.

I recommend searching on Ebay, computers shops don't carry 9-year old 64mb memory sticks on the shelves- there's no demand for it :)

Here are a couple of auctions that look good:

2006-12-01 04:39:45 · answer #1 · answered by Proto 7 · 0 0

The PC100 is the important one, since the other ones are pretty certainly at least up to that spec on the PC100 ram you can still get.

It's quite likely that you can use PC133 ram also.

As long as the type of RAM (the number of pins and socket type) are the same, you should have a pretty hard time buying the wrong type of SDRAM.

2006-12-01 04:28:19 · answer #2 · answered by Setien 2 · 0 0

I suggest getting a new computer. Though, seeing as that wasn't the question, here's your answer. You need PC100 RAM (if you can find it. I may have some somewhere, contact me at VectorX@VectorXinc.com) running at 100mhz. 64mb to be precise (if you mix different sizes, it'll make the computer run slower)

2006-12-01 04:28:50 · answer #3 · answered by Anonymous · 0 0

The "Sandy Bridge" center sequence (Socket 1155) were recalled, you may want to now no longer get a powerfuble motherboard for them. The Intel Chipsets are defective. i'd look ahead to the AMD Bulldozer or wait til they fix the 1155 in April sometime. Bulldozer might want to be out in some weeks. in case you want to construct now, i'd advise the i5 7XX sequence or AMD Phenom II X4 965-970 processors. i'd heavily wait despite the indisputable fact that if i might want to need to. we are purely speaking a pair months on the numerous. **EDIT upload*** do now no longer understand why human beings insist on recommending a defective Intel product it fairly is recalled! guy human beings! See the article less than... *** Yeah Sparkey, advise a processor that you'll now no longer purchase a motherboard for, sturdy suggestion! ****ALL**** of the 1155 chipsets ***ARE*** defective. The CPU's are constructive yet worthless and not using a motherboard to position them in. particular!!! you may want to now no longer purchase an 1155 motherboard. they're ***all*** pulled from sales and Intel is providing a no questions requested RMA on those provided with an selection to practice them until eventually the nice and cozy silicon is released.

2016-10-08 01:30:13 · answer #4 · answered by Anonymous · 0 0

Old or new pc...its doesn't matter to upgrade of that..if you want to try to upgrade your ram,you should get the new/latest ram (DDR2)slot dimm but the greatest ram in this world is Rambus Ram (but it was so expensive same like it's performance).If you interest to try DDR2 just change your motherboard first and your cpu..maybe it's was take a lot of cost but you will be get a satisfaction...Now we can get 256mb/512mb/1g of memory stick and there can inserted to one slot(i means one slot can inserted of 256mb or 512 or 1g)..one more thing,change the latest hardware can give you more choice to upgrade the some other hardware like AGP card to PCIe (grafik card)...just try your best...good luck

2006-12-01 06:46:49 · answer #5 · answered by redzstar23 2 · 0 0

u need to remember PC 100-222 that's the type u need.

2006-12-01 04:28:11 · answer #6 · answered by Sagar 6 · 0 0

the ram at that time is likely obsolete today and hard to buy, unless you can get it from a second hand computer store

2006-12-01 04:26:58 · answer #7 · answered by david w 5 · 0 0

You can go to crucial.com and use their free memory tool to locate what kind of memory you need. :)

2006-12-01 04:29:21 · answer #8 · answered by arcaemous 4 · 0 0

fedest.com, questions and answers