Give me some tips on performing a three-point turn?

Question

I keep making mistakes in my driving lessons on it.

Answer 1

1. SIGNAL WITH YOUR RIGHT DIRECTIONAL. PULL OVER TO THE RIGHT AND STOP...... SIGNAL WITH YOUR LEFT SIGNAL AND CHECK FOR TRAFFIC.
2. WHEN CLEAR TURN LEFT CROSSING THE ROAD UNTILL YOU ARE FACING THE CURB.
3. CHECK AGAIN FOR TRAFFIC. TURN YOUR WHEELS AS FAR TO THE RIGHT AS THEY WILL GO AND BACK UP TO THE OPPOSITE CURB OF THE ROAD.
4. STOP, CHECK AGAIN FOR TRAFFIC AND PULL AWAY FROM THE CURB
BE CAREFUL WHEN MAKING THIS TURN WAIT FOR APPROACHING TRAFFIC TO PASS WATCH FOR PEDESTRIANS. A GOOD SAFETY TIP IS TO ALWAYS TAP YOUR HORN BEFORE BACKING.

Answer 2

It's very easy, really. When doing the first point, turn your wheel all the way to the left. In most cars, you should be perpendicular (at a 90-degree angle) to the left-side curb/grass. Then, when going in reverse for the second point, turn the wheel all the way to the right (I'm talking until the wheel stops, both times) and then reverse. You should almost be lined up with the other side of the road now. Then, turn the wheel ALMOST all the way to the left, so you turn a little to the left, and then straighten out as you accelerate.

It is best to turn the steering wheel all the way in one direction BEFORE you let go of the brake. Most people start to go while they're still turning the wheel. This prevents you from turning the most you possible can.

Answer 3

1st. thing, make sure, he sees u looking in the rear view mirrors, then drive off the edge of the road as far as possible, then when road is clear, turn ur wheel as far as it will go & dive the car straight across the road with out going into the ditch or hitting the curb, then turn the wheel the other way as far as it will go & put the car in reverse & back up till the car is inline with the direction of the road & then put the car in drive & look in the mirrors again & proceed with causion

Answer 4

Don't do it in two.