English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

5 answers

There are four examples of this wiring can be solo. One is
from an existing source in points, a service truck. So the server
may be set to use various voltages. Second in this venue
for various temporary plugs of high services, i.e. refridgeration,
cold air conditioning, this may be a coaxial issued job. The
next two are more likely an audio system with replacement
voltage, or an audio and television system with conduit fully
arced. IF you have these last two jobs yes individual coduits
though every piece must be labeled and presorte so the link
in unavailable to the public, or the service worker, these are
usually fuse boxed and main fractioned.

2006-11-29 09:47:54 · answer #1 · answered by mtvtoni 6 · 0 0

Yes.

It is wrong to each phase in a separate conduit. Twist all three together with the neutral (if present) and run through the same conduit so the magnetic fields will cancel.

Never run just one phase-wire through a single conduit because the current in that wire will induce current in conduit by magnetic induction.

2006-11-29 16:23:01 · answer #2 · answered by hevans1944 5 · 1 0

If you have a three phase circuit, run all conductors in the same conduit. If there is a neutral conductor that also must be run in the same conduit. Also run the grounding conductor in this same conduit. Make sure your conduit is large enought.

2006-11-29 16:27:46 · answer #3 · answered by Anonymous · 0 0

hevans is correct. If you run them together their magnetic fields cancel. Run separately each wire will induce a current in its conduit causing the conduit to heat.

2006-11-30 02:12:00 · answer #4 · answered by charley128 5 · 0 0

you can run the wires in the same conduit, it will be fine and less expensive!

2006-11-29 17:18:32 · answer #5 · answered by Chuy V1.08 4 · 0 0

fedest.com, questions and answers