For rainy or snowy photographs. Is there some product out there that protects it from the elements I want to capture on film? I have a Nikon N65 and maybe soon I'll have my Nikon D70 I want.
I really don't want to risk mold or mildew getting in.
2006-11-29 03:37:51 · 4 answers · asked by Jenny 4 in Consumer Electronics ➔ Cameras
There are a number of different products available to protect your camera, in a wide variety of prices and styles. Some are hard covers, but most (like those available from a company called Aqua Tech) are soft covers that are waterproof and fit around the camera and lens and are secured by either elastic, velcro or both. I've even seen people use heavy duty freezer bags (good for very mild conditions and an occassional visit to the beach) and thick rubber bands!
Check with a good camera store, they should have at least a couple of choices for you.
Also, I wouldn't leave my camera stored too long in this type of protection. When you're done shooting, remove the covering and let the camera "breathe" in a warm, dry area.
2006-11-29 04:18:31 · answer #1 · answered by Steve 2 · 0⤊ 0⤋
There are a multitude of covers and bags. Some are designed to cover the camera and lens while still allowing you to take pictures. Then you have camera cases designed for the camera. Finally, you have camera bag that you can store them in. The last two - cases and bags - will not allow you to take pictures in inclement weather.
Just FYI - your camera/lens can get mold or mildew from simple sitting in humid weather - doesn't have to rain. If you live in a humid area, get those little packets of gel that take the moisture out of the air. Place both camera and packets in a sealed container.
Also, the D70 and D70s have been discontinued by Nikon. They have been replaced by the D80. The D40 has also just been introduced at the lowest end of Nikon's digital SLR line. Not sure what they are going to do with the D50.
Norm
2006-11-29 05:24:23 · answer #2 · answered by nikonphotobug 3 · 0⤊ 0⤋
I like the thin plastic bags you get at the produce area of the grocery store. Thin enough to still see the readings on the control panel or the print on the buttons, not so stiff that pressing one button inadvertently causes another button to get pressed accidentally, but stops a mist or light rain from possibly frying the electronics. Just make a small hole and push the lens through fully, and make a knot or use a rubber band or twisty-tie to secure the open end (if necessary).
Personally, I don't use extraneous filters to "protect" lenses. I'm more concerned about image quality. The only filter I use, occasionally, is a polarizer. I might some time acquire a graduated ND filter, but I'm in no rush for that.
2006-11-29 08:08:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
some people buy filters(which are relatievly cheaper) and leave them on to protect the lens.
this approach is debated because the new age lens are scratch resistant as they are and the filters causes distortion to the images sometimes.
a good bag is in order i think, besides that the camera's are pretty tough these days.
2006-11-29 03:43:51 · answer #4 · answered by josus76 2 · 0⤊ 1⤋