How do I install an Aftermarket Spoiler on a Nissan 350Z?
2006-11-28 11:47:09 · 4 answers · asked by Desert Rose 5 in Cars & Transportation ➔ Car Makes ➔ Nissan
you can just drill some holes in the trunk, at the mounting points of your spoiler, then install. Or if you buy a new wing, then it should come with instructions on installation, and possibly even a template for where to drill. Your best bet would be to take it to a good auto body repair shop and let them install it, then you will have a garranty that it was installed correctly, and if it ever leaks into the trunk area, they should fix it free of charge.
2006-11-28 15:19:12 · answer #1 · answered by quick_ridez 4 · 0⤊ 0⤋
On the bottom of your spoiler you will find bolts. You need to measure the distance between the bolts, and mark those exact measurements on the trunk of your car. Then you drill out those holes, slide the bolts that are attached to the spoiler, in those holes, and put the nuts on from the inside of your trunk.
2006-11-28 12:23:54 · answer #2 · answered by kyle e 1 · 0⤊ 0⤋
go by home depot or any hardware store and pick up som nuts, bolts and lock washers. measure out your truck and make sure it even than drill slide the bolts through and mount the spoiler.
2006-11-28 11:58:48 · answer #3 · answered by allen p 1 · 0⤊ 0⤋
go by the directions you got with it. you will have to drill the holes in the trunk lid and then bolt it on.
2006-11-28 11:49:40 · answer #4 · answered by mister ss 7 · 0⤊ 0⤋