you don't...it has coil packs and no distribuitor. the timeing can't be set on this model. It's all in the computer.
2006-11-27 14:40:08
·
answer #1
·
answered by Kenneth S 5
·
1⤊
0⤋
you don't its factory set by the compute,r no adjustment necessary ,and it has a coil pack, no distributor you can check the timing but you cannot change it OK, to check the timing you must disconnect the spout connector as stated on the sticker under the hood, and follow the directions to the letter, motor at normal running temp in park with all assy off and then go from there and if you think its the timing its going to be something else ,unless you've change the cam chains and it a tooth off, but its a interference motor valve to piston interference and will not run OK, take care
2006-11-28 03:03:00
·
answer #2
·
answered by Mechanical 6
·
0⤊
0⤋
Would you be asking about the clock....I had a 99 windstar and if I remeber right you press the clock then press the tune or scan
If I am wrong go to this link and you can download an owners manual
2006-11-27 16:20:39
·
answer #3
·
answered by Uncle Red 6
·
0⤊
1⤋