I've just received a pool table and it needs to be re-felted. I'm interested to do this on my own, but I don't know the trick to removing the bumpers so that they, and the slate, can have new felt put on. Is there a way to do this that is standard for most/all pool tables?
2006-11-27 06:08:13 · 3 answers · asked by Brad S 1 in Sports ➔ Snooker & Pool
under the rails there are three bolts, not all tables are the same,if it is a bar table then remove the metal strip on the side and under there you will see the attachment system .....if it is a non-slate table then dont even bother ..most of those are designed to last ten years or so then trashed......
2006-11-27 08:50:03 · answer #1 · answered by Anonymous · 0⤊ 0⤋
you got some good partial answers here but nothing beats a polite truthful conversation with a pro find someone who does that for a living and they will most likely tell you just what you need to know about all the tricks.... they have probably even done a table just like the one you have. Most are so busy that the loss of doing one table will not bankrupt them and you get 25-30 years of benefits good luck and good breaks when you get done
2006-11-28 13:06:02 · answer #2 · answered by doc 4 · 0⤊ 1⤋
Contact the manufacturer for the specs.
2006-11-28 06:22:39 · answer #3 · answered by G-Man 3 · 0⤊ 1⤋