2006-11-26 12:31:46 · 2 answers · asked by traiger480 1 in Cars & Transportation ➔ Car Makes ➔ Nissan
Yep, back there behind that intake. Have to look way down the back, and have a U-joint to help get to it. Not fun at all. Good luck.
2006-11-26 12:34:22 · answer #1 · answered by Silverstang 7 · 0⤊ 0⤋
I use a universal joint 5/8" sparkplug socket 3" extention then another universal joint and 10" extention. You can tape the u joints to the extentions. I use locking extentions. You cannot really see back there and the hoses along the firewall and back of the engine make the job tighter. A good flash light helps a little if you look into the #3 spark plug hole you'll see a little. Remember #5 spark plug you are removing slants backward just like #1 faces foward. Cross threaded plugs come to Nissan garages all the time then we have to remove the cyl head. So start the plug by hand at least four or five turns with out binding up, then tighten.
2006-11-27 08:55:49 · answer #2 · answered by John Paul 7 · 0⤊ 0⤋