English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

4 answers

140 ft/lbs, from factory service manual.

2006-11-26 03:15:57 · answer #1 · answered by yugie29 6 · 0 0

Go with Doug B's answer. The 140 ft. lbs. would be on a truck with dual wheels. Single wheels do not require that kind of torque. If you torque the smaller ones to 140 pounds, 1. you would have quite a time getting them off if you had a flat and 2. it would eventually twist the studs off if you did it very often. On the larger studs that require 120 pounds, you COULD go to 140 with little problem but really isn't necessary. Working in the tire shop at Sears, I have seen quite a number of problems that have arisen with the various situations.

2006-11-26 17:41:16 · answer #2 · answered by pygmybilly 3 · 0 1

100 ft lbs for 1/2 ton and small stud 3/4 ton (1/2 inch stud)
120 ft lbs for 3/4 ton with large stud (5/8 stud)

2006-11-26 03:15:16 · answer #3 · answered by doug b 6 · 0 0

it realy does not matter just put the things on and tighten them till they squeek or sing then they are tirqued enought....

2006-11-26 03:16:52 · answer #4 · answered by red 3 · 0 3

fedest.com, questions and answers