2006-11-25 09:57:43 · 17 answers · asked by Geoffrey D 1 in Travel ➔ Air Travel
so if there is an emergency during takeoff or landing and you have to evacuate you will be able to see where your going a lot better as your eyes will have adjusted to the dark
2006-11-28 07:59:47 · answer #1 · answered by Steve 2 · 0⤊ 0⤋
So your eyes can adjust to the darkness should you have to evacuate the plane in an emergency. It takes time for the eyes to adjust to changes in light tensity - which could be a hinderance in an emergency evacuation. You may note at night in the house before you go to bed and in a light room and if the lights are off in the bedroom - you can not see objects that easy (depending on how dark the room is) - but later as your eyes adjust you can make out objects etc.
Hope this helps.
2006-11-25 18:13:47 · answer #2 · answered by Anonymous · 0⤊ 0⤋
So that you can see out the window. A lot of people who are not frequent flyers get a kick out of looking out the window while the plane takes off and lands. You get a better view when it's dark in the cabin.
2006-11-25 18:01:15 · answer #3 · answered by Mel 3 · 0⤊ 0⤋
They lights get turned off because in the event of an emergency evacuation:
1) Your eyes take time to adjust to the dark and
2) So you can see the emergency lighting along the floor in the aisle.
2006-11-25 18:55:42 · answer #4 · answered by Tom G 1 · 0⤊ 0⤋
Two reasons: To reduce overall power consumption and give the plane everything it needs to land (someone already mentioned this) and also to keep everyone calm and relaxed as possible as the plane touches down. With the lights off, passengers are more likely to put down what they are doing (they should be anyway) and sit back and relax themselves for landing.
2006-11-25 18:06:47 · answer #5 · answered by Whiz77 2 · 0⤊ 0⤋
In case of an rejected take off (RTO) or emergency landing at night time. To get your eyes accostomed to the dark in case of an emergency evacuation. You need to see what you are doing if you have to jump off the trailing edge of a wing.
2006-11-25 18:02:21 · answer #6 · answered by Anonymous · 4⤊ 0⤋
To minimise the glare for the pilot during descent through cloud, alot of light is relected around the aircraft.
Think of driving in fog with dipped lights and then turning the main beam on.
Get it?
2006-11-25 18:08:42 · answer #7 · answered by Bill N 3 · 0⤊ 0⤋
To get your eyes adjusted to the darkness so if there is an emergency evacuation, passengers and crew will be able to see once they have left the aircraft.
2006-11-25 18:09:40 · answer #8 · answered by Ross G 2 · 2⤊ 0⤋
Takes that load off the electrical system for landing.
2006-11-25 17:59:55 · answer #9 · answered by Anonymous · 0⤊ 0⤋
so that the captain can get as much power as posible to the front landin lights so it is easier to land and also to keep the glare to a minimum
2006-11-25 18:00:22 · answer #10 · answered by tmswainyboy 3 · 1⤊ 0⤋