the pc (motherboard pc chips) even though is set to see the hard drvie config automatically...doesn't. when booted it says the boot record cannot be found but when i hit the reset key it will find the hard drive with no problem. Why would it need to be reset after cold power on for it to work? The drive is configed as master and everything in bios seems right. Thanks!!!!
2006-11-23 13:07:14 · 3 answers · asked by tooc0ol4sch00l 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Somehow a setting in your storage management has changed. Try this program it might help.
2006-11-23 13:20:03 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Computers Usually have a small battery in the mainboard to save the bios settings. sometimes when this battery goes low in power, you loose the bios settings so it could be that this Little battery is low in power and might need to be replaced.
2006-11-23 21:20:32 · answer #2 · answered by felipe_cobos2001 1 · 0⤊ 0⤋
See if you can add a "boot delay" or enable the memory check when bootup, which will slow down the boot, giving the HD a chance to spin up.
2006-11-23 23:32:42 · answer #3 · answered by Kasey C 7 · 0⤊ 0⤋