They were working fine on our way to the store this evening. We came out half an hour later and they were acting as described as soon as I started up.
They just stop wherever they happen to be when I turn them off. In interval mode there is no pause between wipes. It seems like they wipe slightly faster when the car is moving.
Could this be a bad wiper motor, or some other piece of circuitry?
Thanks for any insight.
2006-11-22 10:26:51 · 5 answers · asked by John's Secret Identity™ 6 in Cars & Transportation ➔ Car Makes ➔ Toyota
I figure I'll check the wiring first, though I'm always nervous working around the airbag, and let a mechanic look at it if that doesn't work.
I'll be away for a long weekend, so I'll likely just vote for whatever it turns out to actually be. Thanks for all the answers, everybody!
2006-11-28 02:51:45 · update #1
tighten the screws
2006-11-22 12:14:11 · answer #1 · answered by STORMY K 3 · 0⤊ 1⤋
Well This could be in the wiper control arm on the steering column.On my 4runner this piece included the turn signals arm. It was about a $240.00 part.
2006-11-28 10:40:21 · answer #2 · answered by Dave C 1 · 0⤊ 0⤋
the wiper switch is bad in the steering column.
2006-11-22 12:50:34 · answer #3 · answered by mister ss 7 · 0⤊ 0⤋
you probly have a loose wire somewhere might look into checking your wire connection first then check your relays too.
2006-11-26 10:48:40 · answer #4 · answered by wildcat30 2 · 0⤊ 0⤋
sounds like you need a new switch
2006-11-22 10:36:08 · answer #5 · answered by mxzptlk 5 · 0⤊ 0⤋