We are renovating a retirement home and need to cut through 4 layers of drywall.
2006-11-22 07:49:27 · 7 answers · asked by lisa w 1 in Home & Garden ➔ Decorating & Remodeling
some precise cuts to run wire, lights, fixtures, etc
2006-11-22 08:01:15 · update #1
Give the 10 to Bubba.
No other answer is needed.
They can be rented or purchased for under $100, and if the job is large enough BUY one, or more. I have 2,,, a Porter, and a Milwaukee,,, both are higher end, but are workhorses. BTW,,, they are corded.
A normal blade length is approx. 4 inches, but longer are sold, even singley. To avoid a lot of trash and rough edges, use a fine tooth blade. I assume you'll have power shut off,,, and/or know where wiring might be located?
Rev. Steven
2006-11-22 09:23:33 · answer #1 · answered by DIY Doc 7 · 0⤊ 0⤋
4 layers sounds like the contractors had a field day doing work for place use a saw or sledge hammer depending on how much you want to save or take out
2006-11-22 07:56:17 · answer #2 · answered by topgunpilot22 4 · 0⤊ 0⤋
sawzall as long as the conditions are right.::no electric or plumbing.stuff like that in the way.
Or use a utility knife and go one layer at a time.
Or just sledge it if you want it all gone.
2006-11-22 07:57:06 · answer #3 · answered by bigpimpinindittmer 1 · 1⤊ 0⤋
A sledge hammer!
2006-11-22 09:46:12 · answer #4 · answered by worm 3 · 0⤊ 0⤋
by the sound of it just tear it down with a sledge hammer or chainsaw
2006-11-22 07:51:15 · answer #5 · answered by Anonymous · 0⤊ 1⤋
use a sawzall it the best tool to have and you can use it everywhere. you can get different blakes for it to do different things with it , too
2006-11-24 16:14:20 · answer #6 · answered by Bird 3 · 0⤊ 0⤋
with a reciprocating saw.
2006-11-22 07:51:49 · answer #7 · answered by bubba j 5 · 1⤊ 0⤋