It came tightly folded in the package and looks terrible. It's the kind with the flannel type material on the back.
2006-11-20 09:03:06 · 6 answers · asked by K 3 in Home & Garden ➔ Decorating & Remodeling
Use and iron on a very low heat on the flannel side. No steam. And to be extra careful, put a cloth down on it first. You just want to warm the vinyl enough to smooth it and get the wrinkles out.
2006-11-20 09:06:07 · answer #1 · answered by gracel313 6 · 0⤊ 0⤋
Vinyl Tablecloth Flannel Back
2016-11-03 02:37:26 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Toss it in the dryer on the lowest setting. Do not walk away and leave it but check it every 20 or thirty seconds! It will only take about a minute. It will warm up and be smooth but careful not to melt it.
2006-11-20 17:03:41 · answer #3 · answered by Anonymous · 1⤊ 0⤋
You may want to try putting it through a delicate cycle in your wash machine with warm water only and after it spinning remove it quickly to lay it our across a hard surface (picnic table or plywood) working out any imperfections and allow it to fully dry.
Best to ya,
2006-11-20 09:13:44 · answer #4 · answered by Fresh choice 4 · 1⤊ 0⤋
Spary it with water on the under side and then lay it flat to dry or over a back of a couch.
2006-11-20 09:05:46 · answer #5 · answered by i_heart_jake_ryan118 1 · 0⤊ 0⤋
cover ir with a towel and have iron on high heat and press out the wrinkles,, or get placemats
2006-11-20 09:06:51 · answer #6 · answered by STORMY K 3 · 0⤊ 0⤋