Has not been used in a long time and I just gave it a tune up and I'm pretty sure I put it back together right, I sure its the piston oil seal, but could it be something else? any other thoughts?
2006-11-19 13:14:52 · 8 answers · asked by fekd_up 1 in Cars & Transportation ➔ Motorcycles
It would help if we knew what the bike was.....2 stroke 4 stroke.
2006-11-19 14:21:48 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Always give year, make, engine size and model # when asking questions. A 2 or 4 stroke engine will give the same symptoms, but require different repair procedures.
--2 stroke. To much oil in the premix. Worn piston & rings and cylinder. Worn crank seal (clutch side). If water cooled - coolant leaking past head/base gaskets.
--4 stroke. Worn piston & rings and cylinder. Leaking valve guide seals. Coolant leaking past head/base gasket.
2006-11-20 02:54:20 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋
Sounds like a blown oil ring on the piston.
2006-11-19 13:36:31 · answer #3 · answered by Anonymous · 0⤊ 0⤋
it probably a stuck oil ring on the piston. or even if you "did put it back together right" if you didn't tighten the head enough/or proper way the head gasket might be leaking.
2006-11-19 13:53:13 · answer #4 · answered by Anonymous · 0⤊ 0⤋
White smoke is water/coolant. At less your talking about the white condensation that comes out when its cold out. White smoke = water Black smoke = rich Blue/black smoke =oil from worn piston rings or valves
2016-05-22 06:05:19 · answer #5 · answered by ? 4 · 0⤊ 0⤋
Head gasket, scored cylinder, mis-adjusted oil injector... the list goes on.
2006-11-19 13:35:35 · answer #6 · answered by geek49203 6 · 0⤊ 0⤋
blown a gasket,
don`t ride it anymore till you`ve
had it seen to
2006-11-19 13:17:08 · answer #7 · answered by Anonymous · 1⤊ 0⤋
white smoke is caused by water if its water cooled
2006-11-19 15:01:41 · answer #8 · answered by jimh1985 2 · 1⤊ 0⤋