English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

7 answers

2 cycle oil is made to mix with fuel and run through the engine. In a 4 cycle engine, it could destroy your catalytic converter and not provide the proper protection for your main bearings.

2006-11-19 04:29:24 · answer #1 · answered by Lab 7 · 0 0

Do you mean 2 cycle oil? If so just drain the oil and put new oil in to the correct level. I wouldn't drive around with that oil in there.

2006-11-19 04:20:20 · answer #2 · answered by whtsthislif4 5 · 0 0

I don't know what cycle oil is but it shore doesn't sound like it goes in your car. If you put in 2 cycle oil than you should change it ASAP because this oil is made to burn and it could start a fire!

2006-11-19 04:23:17 · answer #3 · answered by CAPTAIN GENIUS !! 5 · 0 0

Just the size of the motor should tell you the grade or the weight of the Oil intended for Motorcycles is TO LIGHT. Read the label on the Can and compare it with your Car's Owner's Manual.

2006-11-19 04:21:36 · answer #4 · answered by rwrocketrider 2 · 0 0

i wouldnt take any chances,drain the oil and change the oil and filter.if you didnt yet start the car then just change the oil.

2006-11-19 08:09:07 · answer #5 · answered by Anonymous · 0 0

don't know but i would change the oil in that car to be safe

2006-11-19 04:23:27 · answer #6 · answered by tweed801 5 · 0 0

Hell YES! DO NOT DRIVE IT! drain it and replace it with the correct type

2006-11-19 04:24:33 · answer #7 · answered by jim h 2 · 0 0

fedest.com, questions and answers