English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

the blower motor for the ac-heat doesnt start we straight wired it to make sure it wasnt the motor and came right on we traced all the way to the fuse box and wasnt get electric and so we pulled the relay and fuse out fuse is fine switched the relay with another but still didnt work so hooked a fluke meter up to the part where the fuse goes in for the blower motor and no eletric.. could i hook a wire say from the knob that turns on the ac if it got 12 volts and rn it to the blower motor or should i run a wire from battary put a toggle switch on it in the car and run it to the blower motor please help

2006-11-19 03:05:07 · 3 answers · asked by leahssweetie 1 in Cars & Transportation Maintenance & Repairs

3 answers

The blower motor draws a lot of power. The little switch on the heater control would not handle the power.

Oh, did you have the key on when you tested for power?

I'd double check the relays. with the key on.

2006-11-19 03:21:56 · answer #1 · answered by Mr. KnowItAll 7 · 0 0

you didn't say if it was manual switching or electronic temperture

Usually the blower resistor goes out with the fancy electronic styles having it go out the worst and causing no fan speed.

before you re-engineer the car... bring it to a shop and have it looked up right as someone said, that fan draws a lot of amps that can burn out stuff quick... plus it ain't now fun with only one fan speed

2006-11-19 22:13:17 · answer #2 · answered by gearbox 7 · 0 0

Check the rheostat, blower motor resistor block, or the ground and get back call in the morning....

2006-11-19 11:18:59 · answer #3 · answered by animikiiasin 2 · 0 0

fedest.com, questions and answers