honda ex800 generator not giving any electrical power?

Question

My honda ex800 generator engine runs great but no electrical power. ALL BREAKERS ARE FINE, any other susgestions,
Gr

Answer 1

Go inside and check the windings to ensure they are producing power. Next move to the controller / inverter to check that the voltage is available at the input. Next would be the output transistors. See if there is switching voltage available and there is voltage available at the inputs. If no switching voltage the problem is within the controller and you will need further documentation to troubleshoot.

http://members.rennlist.org/warren/generator.html

Answer 2

I would be looking for some overload protection in the form of a fuse or trip that requires replacing or resetting. When the machine stopped generating was it in use, was it overloaded did a cable get damaged. Of cause the obvious have you tried another tool or light plugged in or proved that what you were using is OK. Other than that take it back to a service centre. Have a look in the hand book for addresses sales & service. Just had a look on the net and found one with a blown circuit breaker. Looks as that might be a weak point.