2006-11-17 06:47:40 · 2 answers · asked by Jimmy G 2 in Cars & Transportation ➔ Car Makes ➔ Ford
The following is the Ford Workshop Manual Procedure
Positive Crankcase Ventilation (PCV) Valve—3.0L (4V)
Removal and Installation
Remove the crankcase vent hose from the air cleaner outlet tube.
Remove the mass air flow (MAF) sensor electrical connector and detach the wire harness from the air cleaner box stud.
Loosen the clamp.
Remove the air cleaner outlet tube and the air cleaner box cover.
Release the air cleaner box clamps.
Remove the air cleaner outlet tube from the throttle body.
Separate the air cleaner box outlet cover from the air cleaner box.
Remove the air cleaner outlet tube and the air cleaner box cover assembly.
Remove the positive crankcase ventilation (PCV) hose from the PCV valve.
Remove the PCV valve by rotating the valve 180 degrees and removing it from the oil separator.
To install, reverse the removal procedure.
Hope this helps.
2006-11-17 07:53:36 · answer #1 · answered by Anonymous · 0⤊ 0⤋
on the valve cover
2006-11-17 17:30:32 · answer #2 · answered by Ray M 2 · 0⤊ 1⤋