English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I need the technoloy to recycle the used / scrap CD / DVD s or need details to remove the metalisation on CD/DVD.

2006-11-16 23:06:55 · 6 answers · asked by Yogasaravanan N 2 in Computers & Internet Other - Computers

I need the technology. Where can i get? Who can offer me. I have visited lot of recycle sites, sent lot of mail. No result. Any one has the technology or know who can give or know where to get, Kindly provide.

2006-11-19 16:22:49 · update #1

6 answers

Try this at home: toss a CD or DVD in the dishwasher. You will have a perfectly clear disk and a wad of metalized film when the cycle finishes.

You can find the nearest place to take them with Earth 911's locator at http://www.earth911.org.

2006-11-17 09:59:13 · answer #1 · answered by Bo Peep 3 · 0 0

really not! There are nonetheless many people which have not stuck onto the digital song age at that is going to likely be a lengthy time period formerly CD's disappear. purely about 20% of all song listeners get their song totally digitally. as far as DVD is going, the purely different thoughts are HD DVD and Blue Ray ,it really is extra of an determination to DVD as adverse to replacing it, and digital downloads of flicks that are nonetheless quite remote except you savour observing your videos on a show show screen. UGH weeder

2016-11-29 05:28:54 · answer #2 · answered by schebel 4 · 0 0

as simple as it is. follow dese steps

1. just clean ur cd with clean water.
2. dry it with clean soft cloth
3. then just break into some 4 pieces in perfect slices
4. put in a mixer, n grind well
5. grind till it becomes powder
6. once done, spread it in a red cleansing water(which will be used in photo labs)
7. now add paste or quickfix, or cement.
8. mix it well until its difficult to remove the item u use to mix
9. atlast after struggled to remove tat item, now just chap or sit on it to make it thin
10. cut tat thin slice in a perfect circle using this math value
= (measurement of radius of circle from the center hole) ^2 * (22/7)
11. u'll get a value, round it off
12. use a protractor n measure for tat
13. or simply use dat length value from mid of center hole to end of cd
14. use dat as radius n measure it for the circled slice
15. make a center hole by using ur forefinger only...or last small finger if ur hand is big..accordingly
16. now iron it!!!
17. heat it.
18. atlast hav 15mins of baking in microwave oven.
19. now u'll get a brewed, hot, spicy CD

for dvd
* repeat d process on another side.

@@@ note: pls make a sticker to paste as cd-cover by using
nero cd-maker or nero cd cover designer software. @@@

HOPE OTHERS N U TOO HAD ENJOY MAKING OR RE-MAKING OF A CD....

2006-11-24 07:21:51 · answer #3 · answered by personalitystar 2 · 0 0

JUST OPEN AN INDUSTRY FOR CD/DVD.
You will know the technology in both way !

2006-11-16 23:12:27 · answer #4 · answered by Anonymous · 0 0

clean it with water and the silver wrapper will go it is plain plastic then , melt off the plastic to create new plastic objects
if you mean to recycle information you cannot do it unless it is rewritable.

2006-11-17 01:11:00 · answer #5 · answered by Anonymous · 0 0

I think it would be way cost prevented. .

checking

2006-11-16 23:12:45 · answer #6 · answered by c.arsenault 5 · 0 0

fedest.com, questions and answers