2006-11-16 07:31:34 · 4 answers · asked by Anonymous in Consumer Electronics ➔ Cameras
Eye Loed myne frum @ c@rd REEDer .Howe Bout U. L8r
2006-11-16 08:32:37 · answer #1 · answered by Bob 6 · 0⤊ 0⤋
If you get a card reader, no additional software is necessary. This is not only faster, but it saves your camera batteries. Your computer or printer may even have a card reader built into it. I have enough USB ports that I just leave it plugged in all the time.
First of all, be sure there are some pictures on the card. Plug the card reader into an open USB port. Plug the card into the appropriate slot on your card reader. I use Photoshop Elements and as soon as I plug my card into the reader, it starts its own card reader and displays a thumbnail of every picture on the card.
If this does not happen automatically, open your photo editing software. Do whatever you usually do to open a file, but click on the selector where you can change drives. Your card reader will be assigned a new drive name that will be one letter higher than you ever saw before, such as "Drive G:" or such. Then, just double click on the name of the file you want to open and it will appear in your photo editor.
2006-11-16 23:47:07 · answer #2 · answered by Picture Taker 7 · 0⤊ 0⤋
I just hook my camera up to the PC with the USB cable, turn the camera on....... the software supplied with the camera automatically launches..... and I click the button to download the pictures.
You can also use a memory card reader, though in my experience they take alot longer.
2006-11-17 08:25:41 · answer #3 · answered by Anonymous · 0⤊ 0⤋
when u plug it into your USB port then you can go to my computer and it should say on there that there is a camera or a device hooked up and then click on it and check all the pictures u want and download them on the computer it's quite simple and most cameras should have a manual explaining it.
2006-11-16 15:39:36 · answer #4 · answered by ~*cRaCkNeSs*~ 3 · 0⤊ 0⤋