it clicks but doesnt want to start....i dont know where its exactly located....thank you!
2006-11-16 02:26:38 · 2 answers · asked by Laura D 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Disconnect battery (IMPORTANT)
Place car on jacks
crawl under with ratchet and proper socket
Remove bolts
Pull starter out, (You may have to remove the flywheel cover)
Remove wires from each bolt on starter solonoid
Tape wires together if there is multiple wires on either spot, for ease of going back together.
If it is clicking, Replace starter solonoid and buy a solonoid heat shield along with the new solonoid.
(The starter will have the "hot" Red wire from the battery going to it, Just trace the wire to the starter)
Good Luck
2006-11-16 09:37:23 · answer #1 · answered by wi_saint 6 · 0⤊ 0⤋
Disconnect battery. Disconnect wiring. Remove mounting bolts. Remove starter.
2006-11-16 10:51:06 · answer #2 · answered by ? 4 · 0⤊ 0⤋