current
2006-11-16 13:37:18
·
answer #1
·
answered by John B 4
·
0⤊
0⤋
The term "shock" is used most often to refer to the spark-like energy transfer between points of different potential.
Voltage is defined as the potential between two points.
Therefore, the "shock" comes from the voltage.
Once the path is created, then current flows until an equipotential is created (both points are the same potential), or something comes along to break the circuit (like wind blowing out a candle).
The experience of "electric shock" as it applies to animals (including humans) refers to the passage of current through the resistive path ... which happens to be the tissues of the animal.
Again, the cause of the shock is the applied voltage; the result of the shock is the current that flows.
2006-11-16 10:58:58
·
answer #2
·
answered by CanTexan 6
·
0⤊
0⤋
BOTH!!!
An electric shock can occur upon contact of a human or animal body with any source of voltage high enough to cause sufficient current flow through the muscles or nerves. The minimum detectable current in humans is thought to be about 1 milliampere (mA). The current may cause tissue damage or heart fibrillation if it is sufficiently high. When (and only when) an electric shock is fatal, it is called electrocution.
http://en.wikipedia.org/wiki/Electric_shock
2006-11-16 04:37:43
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Both. Current flows in a body due to voltage.
2006-11-16 05:04:30
·
answer #4
·
answered by Hem 3
·
0⤊
0⤋
Voltage is the pressure, current is the volume. Spark plugs have a lot of pressure(volts) but no volume(current). They cause a big shock but little damage.
2006-11-16 04:37:39
·
answer #5
·
answered by foogill 4
·
0⤊
1⤋
A saying I picked up a few years back was "it's the volts which jolts, but the mills that kills". Mills meaning (milli)amps.
2006-11-16 04:43:53
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
both, but the stronger the currnet the more dangerous, current is the killer
2006-11-16 04:36:14
·
answer #7
·
answered by Troy W 1
·
0⤊
1⤋
just remember - volts jolt, current kills
2006-11-16 04:42:46
·
answer #8
·
answered by techno mentalist 4
·
0⤊
0⤋