I had an accident and the bumper is dented and rubbing against the tire and i need to remove it to pound out dents so i do not have to take it somewhre thanks you for your answer
2006-11-11 15:08:38 · 3 answers · asked by seanmcmahon2001 1 in Cars & Transportation ➔ Car Makes ➔ Toyota
It should simply bolt on from under neath and behind the bumper.
2006-11-11 20:43:59 · answer #1 · answered by ? 4 · 0⤊ 0⤋
open the hood and remove the 3 pop clips that are right on top of the bumper cover in between the headlights then on both sides right where the bumper meets the fender there is a 10mm bolt that goes up through the bumper into the fender take those out then from the underneath remove the 8 or so pop clips that goe up through the bumper cover and you will probably need to take out about 3 10mm bolts on each side that hold the splash guards to the cover then disconnect the fog lights and it will pretty much pull off if it is a solid steel bumper then I'm sorry but Ive never seen one like that before
2006-11-12 13:24:12 · answer #2 · answered by dlt 2 · 0⤊ 0⤋
You unscrew it. It's lefty loosey, righty tighty.
2006-11-13 12:51:29 · answer #3 · answered by donna_the_woman 2 · 0⤊ 0⤋