what is the correct tire pressure for snow tires P195 60R15?

Answer 1

in snow use the losest recommended pressure and in dry the highest :)

Answer 2

Hi. It usually states the tire inflation pressure on the side wall of the tire. The P195 60R15 is the numbers that describe the profile width and rim size of the tire. In smaller writing proceeding that # will be information relating to tire inflation. I believe an inflation not exceeding that of 32 p.s.i is recommended for most. Also you may find additional information on the sticker attached to the drivers door of the vehicle. Kneel down and open the door and it should be about head level on the end of the door. Hope this helps you out.

Answer 3

ok right here is the wreck down from left to precise. the 1st character is a letter and stands for: P: Passenger LT: easy Truck ST: particular Trailer T: short-term the 1st style is a three digit style and is the width of the tire in millimeters, from sidewall part to sidewall part. the 2nd style after the scale back is a 2 digit style and is the ratio of the sidewall top to the full width of the tire as a share. If this is lacking, this is believed to be 80 two%. If the style is larger than 2 hundred, then this is the diameter of the finished tire in millimeters. the subsequent character is yet another letter and determines the form of the fabric of the tire: B: bias belt D: diagonal R: radial The style after the letter is two digit style and represents the diameter in inches of the rim that this tire is designed to greater healthy. There additionally are velocity rankings and shipment rankings as properly. in case you may choose for to be conscious of what they're, wikopedia has some charts that designate it for you. as a thank you to respond to your question, those tires are very comparable, however the P195/65R15 is particularly taller in diameter and skinnier in width then the P195/60R15. changing length can impact your vehicles suspention geometry and reason untimely tire placed on, which interprets into altered dealing with, traction, and braking overall performance while placed to the attempt. Its stated which you employ the the superb option length tire to evade having to change them as oftentimes. If no longer then you definately can consistently get an alignment to verify the hot tires. in case you will get them for loose then choose for it, the version is minimum! wish this permits:)

Answer 4

Go by what your owners manual says for your car. There should be also in the drivers side door or glove box a recommended tire pressure. Do not go by what it says on the tire. The pressure listed on the tire is a statement of the maximum load ability of the tire at it's maximum allowable pressure (that is the pressure listed on the side of the tire)

Answer 5

Assuming these are the factory recommended sized tires for your car, then your PSI should be whatever the owners manual for your car says it should be. You should always operate using the manufacturer's recommendations!

Answer 6

i own a repair shop,and if you,ll look on the tire it tells you,don't over inflate them always go by what the tire says it should have in it,this is the best way,if it says 32 put 32 in it,,good luck i hope this help,s.

Answer 7

generally the tire pressure should be at 35psi for any tire, but you could always check with the tire shop and ask them

Answer 8

look on the side of the tire and it will tell you, usually 30 to 35 lbs.

Answer 9

look on the side wall of the tire it is right there look and read

Answer 10

It depends on the vehicle it goes on