how to use a floor buffer?

Question

my son just got a job neeeds to no how to buff flooors how to use the buffing mchine help me please

Answer 1

Plug it in and hold on!!! I am sure somebody will help him, it is not that hard....I just did mine 2 days ago!!!

Answer 2

Since you live in an apartment, you should clear it with management. You don't want to get in trouble if something goes wrong - or if your neighbors decide to complain about you making too much noise. They might be able to recommend a place for you, or they may even pick up the cost of it.

Answer 3

I would assume there are many different brands/types of floor buffers. His best bet would be to ask someone at the job how to use it rather than just wing it and risk damaging the floors.

Answer 4

start on an area where he can get afeel for the machine without causing any damage.hold both handles,but don't think you are going to control the machine-you can't.VERY SLIGHTLYlift the handle to glide left-VERY SLOWLY bring it back down to center-VERY SLIGHTLY lower the handle to glide right.always keep in mind that the side-to-side movement is determined by where friction of rotating pad is greatest on floor.forward and reverse are best done with gentle push and pull.start slowly and carefully and you'll be ok.NO BRUTE FORCE

Answer 5

Yep, definitely don't "wing it." I do professional floor care, and I could never explain it in writing. Your son needs training. Didn't he tell the boss he doesn't know how to use the machine?

Answer 6

Its very simple wen you get the hang of it. Just press the leaver then to move it right lift it slightly then back down to go back. GENTLY Good luck ;-)

Answer 7

just LIGHTLY squeeze the right handle and then gently guide it side to side with pressure on both handles . .