Can we install ceramic tile over existing backerboard after removing the vinyl currently installed on it?

Question

When we remodeled our kitchen 3 years ago, we were told we needed to put down cement backerboard before the vinyl could be installed (to insure proper warranty of the vinyl). So we did. Now we would like to replace the vinyl with ceramic tile. Can we simply remove the vinyl and use the existing backerboard to install the tile on? We want a quality tile job, but would like NOT to have to take up the backboard and put down new backerboard.

Answer 1

To immediately answer the Q,,,Certainly!

The fact that it's already the proper substrate is to your advantage. All you need do is remove as much adhesive residue, as possible, for a smooth flow of tile mortar and a level/plum surface upon application.

After installing thousands of sq. ft. of tile, I've run into this often, and never had a problem.

Rev. Steven

Answer 2

yes, If your backerboard is rated to hold the weight of the tile. You most sertainly can. You may also hunt down a crack isolation product made by shluter systems called ditra. usually about a dollar and a half per square foot. using this isolates your tile from your backerboard and helps with contrast and expanding also with any ground movment breaks the bond between the tile andf the backer alowing you to have a floating floor

Answer 3

Yep. no problem. Just make sure you get ALL the glue off from the vinyl.