How can I wire an extension socket so it can only receive calls not dial out?

Question

I want to have an extention in my shed. As it would be quite easy for someone to get into I don't want them to use my phone for expensive calls

No point in modifying the phone they could plug a new one into the socket

Answer 1

The website below is bout phone socket wiring, you could maybe work it out from that or contact website owner theres a link at top of page

http://www.wppltd.demon.co.uk/WPP/Wiring/UK_telephone/uk_telephone.html

Answer 2

As far as I know you cannot modify an extension of a regular phone line to only receive calls. Even modifying a phone by disconnecting the dialer pad would not work because you can dial with the disconnect button on many phones (mostly older ones, not newer electronic ones as far as I know--but I've never tried).

Maybe the phone company can offer you a decent rate on a party line or something similar that will only allow incoming calls on the second line, which you can install in your shed. Then calls that come in will ring in both places but you wouldn't be able to call out on the shed phone. This would only work, of course, if the phone company in your area still offers party lines!

Good luck!

Answer 3

You can't do this by wiring the socket. Disabling the dialler in the phone makes life more difficult. However, if your exchange supports pulse dialling, you can still dial out using the hook switch.

Someone breaking in is more likely to nick the phone than run up your phone bill. Why not just take the phone indoors when you're not using the shed?

Answer 4

Run the extension in the shed back to a junction at the house into which you plug in the other end of the extension lead. When you are out of the shed and in the house simply remove the plug that works your shed extension which will kill the line stone dead. You don't need complex wiring for that but you do need to remember to plug your line in and take it out.

Answer 5

I relatively have seen resembling this until eventually now. in specific cases a fault can happen which motives the line to look as though there is an off-hook device related to it. in this subject you will get an engaged tone while attempting to dial the quantity from yet another line. In those cases, while reporting a fault to BT, they could be quite insistant that there's no longer a fault on the line... this is using the fact the line seems to be working, yet basically off the hook. in case you detach all contraptions from the line (which contain all filters and ADSL modems) and nevertheless get an engaged tone, then there is in all probability a fault with the line. in case you start to get a ringing tone while dailing from yet another line with all your contraptions unplugged, then attempt plugging each and every device back in and redialing, until eventually you come across the offending device. If there's a fault with the line, and not a device, then you certainly ought to touch BT to get it resolved - do no longer take no for an answer. observe although... because of the fact there is little communications between the proper departments interior BT, you're able to be able to locate which you loose your broadband connection as a effect of having your voice up and dealing back. this is becuase one answer is to %. yet another pair to deliver the telephone line down. Your ADSL connection remains related to the previous line for this reason, and you will ought to touch your ISP to get it resolved.

Answer 6

The easiest way would be to buy a pair of DECT wireless phones so the main one ( the base ) is in the house and the second one with its charger is in the garage, you then set the second phone to refuse to make out going calls , you can buy these in pairs so al you have to do is plug them in. Or you could just buy one wireless phone and take it with you in the garage and bring it back when you have finished,

Answer 7

You cant, any pair of wires will carry a signal, if you're with BT you can have the option to have to enter a code to unlock any phone to make outgoing calls, but if you're using one of the crappy cable networks i have no idea if they do the same.

Answer 8

Easier to modify the phone. Disconnect the dialer pad in side.

Answer 9

Call your provider and have all outgoing calls blocked. If you want to make outgoing calls, establish a PIN.

Answer 10

you cant, best bet would be to use a plug in type extension and only connect it when you go outside.