English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

3 answers

How safe they are depends on how powerful they are. They radiate in the infrared so the light isn't visible.

You'll need a tube with electrodes spaced apart a few feet with wires coming in. You'll need a high voltage source, maybe a transformer from a neon light hooked to the wires.

You'll need a vacuum pump and you'll need to pump the tube down to about 5 mm of pressure while you feed in a mixture of helium, neon and carbon dioxide. You'll have to look up the mixing ratio.

You'll need something to seal the end of the tube with. Ideally you'll have mirrors but more than likely the mirrors will be external. One will have to be reflective the other should half silvered and of a type that won't absorb the infrared light. Most glass will absorb the light and you won't get any output. Some plastics work and you can always put the mirrors outside the tube (one with a pin-hole in it) and use Brewster angles (look it up) to seal the end of the tube... No glass on the seals; special plastics or sodium chloride plates work.

Then you'll need an infrared detector; the light is invisible and a lot of patience aligning the mirrors.

2006-11-06 02:56:48 · answer #1 · answered by Gene 7 · 0 0

Anything is safe, if one understands it, and adheres to the proper safety precautions when using it. And any laser can cause harm if it's misused: even the sub-milliwatt models can cause eye damage, if you look into them. CO2 lasers, because of their high power output, and the fact that the beam is invisible, require extra care with regard to safety procedures. For a good description of such lasers, including safety matters, check out:

http://members.misty.com/don/laserco2.htm

For plans on how to build your very own CO2 laser (and a whole lot of other fiendish stuff!), check out:

http://www.amazing1.com/

2006-11-06 04:02:29 · answer #2 · answered by pack_rat2 3 · 0 0

Non metallic oxides is an acidic oxides, they offer acids even as they react with water, CO2 is an acidic oxide , in spite of the indisputable fact that it's not acid , if there is humidity contained in the ambience it converts to carbonic acid , it really is risky acid and decomposed to CO2 and water.

2016-11-28 20:15:36 · answer #3 · answered by ? 4 · 0 0

fedest.com, questions and answers