there is something in the holes,could this be the fixing pins from old badge?if so..any ideas as to remove them,ive tried pushing thru with small screwdriver,but no joy.
2006-11-04 08:02:33 · 5 answers · asked by uksglory69 1 in Cars & Transportation ➔ Car Makes ➔ Renault
Try drilling them out carefully with the appropriate size of drill bit.
2006-11-04 08:06:20 · answer #1 · answered by Goofy Goofer Goof Goof Goof ! 6 · 1⤊ 0⤋
Try removing the inner trim panel and if you can get a grip with pliers pull them out if not very carefully drill the pins out from the inside so if you do slip with the drill any marks on the paintwork will be on the inside and not visible hope this helps
2006-11-04 16:09:46 · answer #2 · answered by Anonymous · 0⤊ 0⤋
If plastic made, try to melt them with small lighter, then pick them out with small point screwdriver. I am not sure their backside is also open so I guess u can not push then form the other side.
2006-11-05 07:00:31 · answer #3 · answered by marechal_00 5 · 0⤊ 0⤋
Use a drill.
2006-11-05 23:22:23 · answer #4 · answered by malcy 6 · 0⤊ 0⤋
try some blue tack
2006-11-04 16:31:48 · answer #5 · answered by anne 2 · 0⤊ 0⤋