i'm trying to replace the oil pump in my 93 explorer 4.0 without removing the engine .Can someone please help me with this one.
2006-11-02 16:36:06 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
i own a repair shop,and you,ll have to jack the engine up really high in it to get the oil pan off of it and its still going to be a hard job to do,if you,ll take the two center bolts out of the motor mounts this will allow you to get it up some but its going to be close in it,if it does come off, i have lifted the engine up before with a hoist to get them off,but there no fun to do at all,good luck,i hope this help,s.
2006-11-02 16:41:55 · answer #1 · answered by dodge man 7 · 2⤊ 1⤋
well you need to remove the oil pan first and what ever is in the way of that must be removed to get to the pump, but its to new of a vehicle to need such a thing, take to a good ASE shop or dealer and have em diagnoses it first and see if that what it needs OK,, p/s if the vehicle runs ands not rattling try taking a pressure test first and or replacing the pressure switch first OK, if it rattles its probably past the pump replacement
2006-11-02 18:53:37 · answer #2 · answered by Mechanical 6 · 0⤊ 0⤋
Disconnect your motor mounts,and jack the motor as high as you can.Have 2 4x4 blocks of wood to hold the motor up.Take off the oil pan,and then the oil pump.
2006-11-05 10:23:05 · answer #3 · answered by George K 6 · 0⤊ 0⤋
Please tell us why you would want to change the oil pump ??
2006-11-02 17:53:52 · answer #4 · answered by tronary 7 · 1⤊ 2⤋