what is the firing order for a 94 gmc jimmy 4.3L?

Question

I need a drawing perferably

______
( o o )
( o o o ) Distributer
( o o )
-----------

______
( o o )
( o o ) Engine
( o o )
-----------

Answer 1

one of these sites will have it :)

Answer 2

Firing order is not 1-2-3-4-5-6, as previously stated. This was the firing order used in the 60 degree engines (2.8, 3.1, 3.4). The firing order for your 4.3 would be as follows; 1-6-5-4-3-2, with the position on the distributor running clockwise. Here is a diagram to help you, with 1 and two being at the front of the engine, and one being on the driver's side.

2 4 6
O O O
O O O
1 3 5

On the distributor


O1 O6
O2 O 5
O3 O4

Hope this helps you out, firing orders can be very confusing, just remember, number one is on the drivers side, at the front of the engine.

Answer 3

1 6 3
o o o
o o o Distributor
2 4 5


O# 1 O#6 O #3 } Cylinders V6
O#2 O#4 O #5

Answer 4

i'm effective you have tried each and all of the plain solutions, so the terrific element to do is to a million) seek the cyber web, and then in case you do no longer locate any solutions after various finding (using fact the problem could be particularly uncomplicated an no longer well worth it), 2) take it to the vehicle shop. Use the cyber web to dig up some airborne dirt and dirt on them previously you circulate! or you should get ripped off.

Answer 5

firing order is 1-2-3-4-5-6

Answer 6

http://autorepair.about.com/library/firing_orders/bl-gmc-firing-94.htm

FORGET THE REST go here

Answer 7

Here you go, A nice visual. Right from GM.
http://www.bustedspoke.com/PhotosP/php6WFpHY

Answer 8

if memory serves me correctly...the firing order is 123456...this may sound odd but look on the intake manifold...it is stamped on there.

Hope this helps.

Answer 9

which 4.3 engine do you have throttle body injected or tune port injected.

Answer 10

165432, clockwise rotation looking down at it.