I have a wedding tape that I want to record..I put it in one vcr and the blank tape in another .how do I record from one vcr to another?
2006-11-02 05:23:41 · 4 answers · asked by sahar z 1 in Consumer Electronics ➔ TVs
Most TVs have dual sets of audio/video inputs (often yellow and white). You could hook them both up through those. Or some TVs only have one set of input plugs, so you'll have to hook the other VCR up through the cable, which is how it was done before input plugs. You should consider getting a DVD Recorder, and recording your wedding film onto a DVD. They are maybe $100+ now, and have all sorts of extras to help perfect your picture quality. You would hook it up as well as the other VCR.
2006-11-02 05:34:18 · answer #1 · answered by Nikki 6 · 0⤊ 0⤋
each and each VCR has 2 distinctive outputs, RF and audio/video. The RF output might circulate to the antenna connection on a television, OR the antenna enter on a 2d VCR. song the receiving VCR to channel 3 (or 4 based) and play on the 1st and record on the 2d. Likewise, you are able to connect the A/V outputs of the 1st to the A/V inputs of the 2d and returned, play and record on the acceptable VCR. You connect your television or computer screen to the RF or A/V output of the 2d VCR, the single you record with so which you will locate what you're recording. in case you attempt this with a pre-recorded tape, it probable won't artwork. Pre-recorded tapes have a area noted as Macrovision further to the indicators recorded on the tape which prevents a recorder from locking onto the video and recording it. it incredibly is a type of replica protection. There are sign amplifiers accessible for a nominal value which take the placement of the A/V cables which could effectively override the Macrovision so which you will record a replica secure tape. by capacity of ways, the acceptable comparable type of replica protection exists on some DVD's, yet it incredibly is rather dealt with interior the applying put in interior the DVD recorder and is dealt with very similar to the area code is which prevents enjoying a DVD from yet another area.
2016-10-21 03:51:50 · answer #2 · answered by ? 4 · 0⤊ 0⤋
FROM THE VCR WITH THE TAPE RUN A CABLE VIDEO OUTPUT TO VIDEO INPUT TO THE BLANK VCR PRESS PLAY ON THE VCR WITH THE TAPE AND RECORD ON THE VCR WITH THE BLANK...
2006-11-02 05:33:41 · answer #3 · answered by darkpony6262 3 · 0⤊ 0⤋
You have to run a video cable to the aux. in and the audio, I think its yellow and white.
2006-11-02 05:32:10 · answer #4 · answered by Anonymous · 0⤊ 0⤋