2006-11-01 14:02:33 · 6 answers · asked by Anonymous in Home & Garden ➔ Decorating & Remodeling
Spraying always gives a better finish.
Usually people use oil paint for exterior use, but with a fiberglass door I would recomend latex (water based) with enamel. Enamel is basically what is on your teeth. Paint with enamel in it has a nice durable protective finish. For a door I would go with a semi or high gloss finish. If you decide to go with a dark color, just remember that colors fade in the sun over time.
If you are not comfortable with spraying your door, use a high quality brush and/or roller, but again the best way to paint a door is with a sprayer.
2006-11-01 14:18:54 · answer #1 · answered by Doom Kisses 2 · 1⤊ 0⤋
Spray paint is best so the strokes are not seen. Use a high gloss enamel paint. Gives it a shine as well as easier to maintain to remove any stains. I strongly recommend this as an entry door has a lot of traffic and you want something that will last.
2006-11-01 14:11:14 · answer #2 · answered by rosieC 7 · 0⤊ 0⤋
roller, then cut in w/a purdy brush(looks like a reg. brush but has sponge material on the tip) spray painting will leave unevenness that will be very noticeable in bright outdoor light.using a professional spray gun will leave a nice finish but VERY tough to repair w/o leaving noticeable touch-up marks and damage is inevitable on entry doors, and brushing it will leave brush marks that again will show well in light.
2006-11-01 15:18:48 · answer #3 · answered by Crissy 2 · 0⤊ 0⤋
RE: the thank you to eliminate spray paint off homestead windows of vehicle? Can a razor blade eliminate spray paint from homestead windows of a motor vehicle and the windshield? I by danger have been given it on my homestead windows and windshield and that i don't comprehend what could be utilized to eliminate it I heard a razor blade can eliminate paint yet I'm uncertain approximately spray paint?
2016-12-28 10:00:14 · answer #4 · answered by ? 3 · 0⤊ 0⤋
used a good primer first it will make what ever you used stick better. Also remember that a high gloss finish will show flaws on the door
2006-11-01 15:22:21 · answer #5 · answered by Percy 2 · 0⤊ 0⤋
TAKE OFF DOR AND SPRAY IT.. USE A PAINT THAT IS BEST FOR PLASTIC, BUT IF CAN NOT FIND ENAMEL IS SECOND BEST
2006-11-01 14:43:34 · answer #6 · answered by boby223 2 · 1⤊ 0⤋