What tools would I need?
2006-11-01 02:15:10 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Volkswagen
If you can locate the tensioner, this rides on the back of the belt
and is spring loaded I would give it a shot. but if the a c compressor is driven by a v-belt and must come off first, then I
would reconisider. the routing of all serpentine belts are on a sticker under the hood someware. to remove the belt on the a c
compressor requires removing the tire and crawling under the car
and you will need a set of metric allen wrenches on a 3/8 drive socket set and another person. it is a pain
2006-11-01 05:15:51 · answer #1 · answered by stevet 4 · 0⤊ 0⤋
If you don't know what tools you need; I would suggest taking it to a mechanic.
It is doable but you need some mechanical knowledge and to get the belt tight enough but not too tight.
2006-11-01 02:17:23 · answer #2 · answered by Anonymous · 0⤊ 0⤋
a breaker bar 1/2 in pull back tensioner take off old belt put new one on in reverse of taking off
2006-11-01 02:18:45 · answer #3 · answered by Ray M 2 · 0⤊ 0⤋
Try this: autozonecom/servlet/uibroker They will explain to you how to do it and what tools you need.
2006-11-01 02:19:02 · answer #4 · answered by Thomas S 6 · 0⤊ 0⤋