it's a glass shower door that we are trying to cut!
2006-10-29 20:35:03 · 9 answers · asked by SR76 1 in Home & Garden ➔ Decorating & Remodeling
NO def. not, I've been into this before, once the glass is tempered it cannot be altered! Did you put the shower tray in, not properly levelled???
2006-10-29 22:15:57 · answer #1 · answered by jayktee96 7 · 0⤊ 0⤋
According to this site: http://www.diydata.com/materials/glass/glass.htm The answer is no.
Quote: It is important to note that the [glass toughening] treatment must be applied only after all cutting and processing has been completed, as once 'toughened', any attempt to cut the glass will cause it to shatter. Unquote.
2006-10-29 20:51:08 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Yes it can be cut but you will not be able to do it yourself with the small diamond tip tool at DIY shops, you could end up smashing it. Best bet is to take it to a shop and have it done.
2006-10-29 20:48:17 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Sorry. No you can't. Once glass has been toughened you're stuck with it the size it is.
2006-10-29 20:36:31 · answer #4 · answered by stienbabe 4 · 1⤊ 0⤋
You should be able to get a diamond cutting blade from your local DIY shop!
Good luck!
2006-10-29 20:45:11 · answer #5 · answered by peta g 2 · 0⤊ 0⤋
Can't be done. Check the fitting of the door.
2006-10-30 05:02:08 · answer #6 · answered by Snowlizard 3 · 0⤊ 0⤋
take it to a glazier they cut it with a water saw
2006-10-29 20:39:44 · answer #7 · answered by DAVID M 3 · 0⤊ 0⤋
take it to a glass shop ..they do it for you ..for a small fee
or if you are nice to them you may even get it done free
..to them it's a mater of seconds..good luck
2006-10-29 20:41:33 · answer #8 · answered by JJ 7 · 0⤊ 1⤋
A glazier will be able to do this for you - you won't be able to do this job on your own.
2006-10-29 21:25:45 · answer #9 · answered by Anonymous · 0⤊ 0⤋