English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

the problem i got i replaced the coil and the enjector and still no fire on the plug in the center back can someone please help meeeeeeeee

2006-10-29 15:54:20 · 5 answers · asked by big1cave 1 in Cars & Transportation Car Makes Nissan

5 answers

i own a repair shop,and you need to check the wire and see if it has a broken spot in it or something,i have seen them do this before,and it don't matter what you replace on it you wont never get any fire on it,good luck,i hope this help,s.

2006-10-29 16:03:13 · answer #1 · answered by dodge man 7 · 0 0

Check for power at the injector plug and check for power at the ignition coil 12v should be present both places key on. 1995 Maximas have engine wiring harness issues over on the passenger side wiggle those wires see if it starts running on the #3 Cly.

2006-10-29 23:54:12 · answer #2 · answered by John Paul 7 · 0 0

Make sure you check the plug for cracked porcelain, tightness, and proper gap. Make sure you are using the proper plugs also, some imports will only work properly with dual electrode plugs, it's best to go by the manufacturers specs on this.
Then Check your wires, it's easiest at night, use a sprayer with some water in it and spray the wires and watch for sparks.
You should check your electrical connectors and make sure everything is nice and tight.

2006-10-30 11:20:19 · answer #3 · answered by quick_ridez 4 · 0 0

I think the best solution is to take the car for an engine diagnosis that way you'll be sure of what the problem actually is as opposed to just changing stuff you might actaully save money that way

2006-10-29 20:01:07 · answer #4 · answered by Mangaliso L 2 · 0 0

try the distributor

2006-10-29 17:11:04 · answer #5 · answered by www_andrew 2 · 0 0

fedest.com, questions and answers