Probably a wiring problem. Check your fuses and the wiring harness, make sure there's nothing bare or rubbing against something else that's causing it to short out. Don't mess with it too much though because wiring is a pain to sort out if you screw it up. If it's that new maybe take it to the dealer, should still be under warranty, isn't it???
2006-10-25 08:29:04
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
I had this problem with my rear brake light/turn signals on an Oldsmobile 88. After 2 years of replacing the darn bulbs every two weeks I noticed that there was a lot of moisture in the fixture. Turns out water was running into the lights everytime it rained. Used some silicone to seal around the top of the fixture and voila...no more burnt out lights.
Isn't this still under warranty? You might want to take it to the dealer you bought it at and (politely) complain about what a pain in the butt this is. A good and reputable dealer should help you out.
Good luck
2006-10-25 15:37:36
·
answer #2
·
answered by Gem 7
·
0⤊
0⤋
Vibration will do that. So will high voltage. Make sure your alternator isn't putting out 16 volts, and make sure the things are mounted solidly.
2006-10-25 19:09:17
·
answer #3
·
answered by Nomadd 7
·
0⤊
0⤋
check your fuse box
2006-10-25 15:29:26
·
answer #4
·
answered by joel o 1
·
0⤊
0⤋