I have a Dell Latitude D600 with a Radeon Mobility 9000 video card and a docking station. I also have 2 monitors that I would like to operate in addition to the notebook screen. I can use both monitors at once, but, when I open the notebook, one of the monitors stops receiving a signal. I believe this must be a software issue because I can use any combination of 2 of the displays at once, and the Radeon Mobility 9000 is is supposed to support three displays. Any ideas?
2006-10-25 02:03:15 · 4 answers · asked by Z 1 in Computers & Internet ➔ Hardware ➔ Monitors
It sounds like a hardware issue. It is very possible that the chipset is designed to support either the laptop screen or a monitor. My suggestion is to email or call Dell to ask about the video card. They will likely send you to ATI... In any case, I would try a third monitor and see if that works.
2006-10-25 02:11:56 · answer #1 · answered by captainspizzo 3 · 0⤊ 0⤋
have you thought to call the manufactorer? If its supposed to run 3 monitors at once and only 2 are working at the same time, then I would think to call the manufactorer.
2006-10-25 02:08:57 · answer #2 · answered by Jack 4 · 0⤊ 0⤋
have to find out its settings from its user setup guide. there must be an option the driver settings to setup dual display.
try the link below might help you points apreciated.
2006-10-25 02:13:11 · answer #3 · answered by Rockytruelyrox 5 · 0⤊ 0⤋
hydravision should solve this, and its available on the ati site.
2006-10-25 02:07:48 · answer #4 · answered by joelius24 7 · 0⤊ 0⤋